Search by Keyword: Sort Reverse

Tooling-Accessories

New Atlas 4" 4-Jaw Chuck

NEW in Box. These Chucks were typically installed on New Atlas Craftsman Lathes. They can be used on other Brands that have a 1”-8 Spindle mount size. Made in England by Atlas.

1"-8 Threaded Mount

Price:    $ 110.00

Year:   

Serial No.   

Email:    Click Here to Email Us

3
   

New "Take-Off" Summit Steady Rest

This is a New Steady Rest that was "removed" from a New 2021yr. Summit 20-4A-series Lathe. The Customer that purchased this New Lathe had no need for a Steady Rest in his Application. It is un-used. 

Price:    $ 1,100

Year:    2021

Serial No.   

Email:    Click Here to Email Us

3
   

Used Skinner 12" 4-Jaw Chuck with Top 2-Pc. Jaws

3" Thru Hole, Top 2-piece Jaws (Skinner Chuck # 21912-A8-62B)

Made in the USA!

Price:    $ 550

Year:   

Serial No.   

Email:    Click Here to Email Us

2
   

NEW HHT "Take-Off" 4-Jaw Chuck

NEW “Take-Off” 20” 4-Jaw Chuck with Solid Jaws, ~ 6-1/4” Through Hole, D1-11 mount. This Chuck is unused and was removed from a new Summit Engine Lathe. Also Includes Chuck Wrench.

Unused - Removed from new Summit Lathe

Price:    $1350

Year:   

Serial No.   

Email:    Click Here to Email Us

12/21/2021 12:00:00 AM
12/22/2022 12:00:00 AM
1
   

Collets Holders for Warner & Swasey Turret Lathes

Includes the following items:
Approx....... 40 each “Metric” ROUND 3-piece Collet “Sets,” 6 each “Inch” 3-piece Collet “Sets” (4 each ROUND - 2 each HEX), 9 each “Partial” Collet Sets, 3 each Eccentric Pusher Pads (part # 5200-1-3/8RNS .109 eccentric), 1 each hardinge 5/8” ROUND-serrated Collet and 9 each Large Collet “Holders” (SEE ADDITIONAL DESCRIPTIVE INFORMATION BELOW):
“INCH” 3-pc. Collet ''Sets''
Rounds - (1ea.) 7/8“, (1ea.) 1-1/2“, (1ea.) 1-3/8“, (1ea.) .461“?
Hex - (1ea.) 1“, (1ea.) 1/2“
“METRIC“ 3-pc. Collet "Sets" (All sizes are MM):
Rounds - (2ea.) 12, (2ea.) 13, (1ea.) 14, (2ea.) 15, (1ea.) 16, (2ea.) 18, (2ea.) 19, (1ea.) 20, (1ea.) 21, (2ea.) 22, (2ea.) 23, (2ea.) 24, (2ea.) 25, (1ea.) 26, (1ea.) 27, (2ea.) 28, (1ea.) 29, (1ea.) 30, (1ea.) 31, (1ea.) 32, (1ea.) 33, (2ea.) 34, (1ea.) 35, and (1ea.) 36MM
Hex - (1ea.) 17, (2ea.) 18, (1ea.) 19, (3ea.) 20, (1ea.) 21, (2ea.) 22, (1ea.) 23, (1ea.) 24, (1ea.) 25, (1ea.) 26, (1ea.) 27, (1ea.) 28, (2ea.) 30, and (1ea.) 32MM
COLLET HOLDERS (approx. 4-3/4“ OAL) - (9ea.) Total:
(1ea.) 25MM Round, (1ea.) 37MM Round, (1ea.) 28MM Hex, (6ea.) Misc.
Please note: Quantities, descriptions, etc. as listed above are approximated. We have done our best to provide as complete and as accurate a listing on this tooling as possible, however, all information is subject to verification and should be confirmed by the buyer prior to purchase.

Price:    $250

Year:   

Serial No.   

Email:    Click Here to Email Us

12/21/2021 12:00:00 AM
12/22/2022 12:00:00 AM
009
   

Used Troyke 18" Rotary Table

Price:    $ 800

Year:   

Serial No.   

Email:    Click Here to Email Us

   

Used "Lot" of NST 40 Taper ToolHolders

Price:    Call for Pricing & Spec's

Year:   

Serial No.   

Email:    Click Here to Email Us

   

Used Boye & Emmes Steady Rest

(From Boye & Emmes Manual Lathe ~28-32” Swing) With Roller Tips, ~9-1/2“ dia. capacity, Overall dimensions = ~28“ tall x ~24“ wide, Base Width = ~ 16-3/8“ wide, Approx. 15-1/4“ from outer edge of base to center of v-way groove.

From Boye & Emmes Lathe (Approx. 28 - 32" Swing)

Price:    $ 750

Year:   

Serial No.   

Email:    Click Here to Email Us

   

New "Demo" Edwards Coper Notcher (for 100 Ton Edwards Ironworkers)

Reg. Price $ 1,479 (f.o.b. Edwards in Minnesota)......SPECIAL

Only $ 850 f.o.b. OKC, OK!

Price:    $900.00

Year:   

Serial No.   

Email:    Click Here to Email Us

   

New "Take-Off" TAPER ATTACHMENT

With 0 - 5" Taper/Ft. and 0 - 13 Degree Angle scales

***Current New Price from Acer is $ 850. (SAVE $ 300!)***

Removed from New ACER 1340G Lathe

Price:    $550

Year:   

Serial No.   

Email:    Click Here to Email Us

   

New Aloris Toolholders

"BLOW OUT" Prices!!!! While they Last!!!

NEW ALORIS TOOLHOLDERS (Limited Quantities)
CA-6 Multiple Toolholder (1 available)...Reg. Price New $ 194.00... "SPECIAL" Price ONLY $ 125.00
CA-7 Universal Parting Blade Toolholder (4 available)...Reg. Price New $ 175.00... "SPECIAL" Price ONLY $ 110.00 ea.
CA-8
 Threading Toolholder (2 available)...Reg. Price New $ 183.00... "SPECIAL" Price ONLY $ 120.00 ea.
CA-42
 Boring Bar Holder (1 available)...Reg. Price New $ 220.00... "SPECIAL" Price ONLY $ 150.00

"Get 'em While they Last! When they're Gone......They're Gone!” 

Price:    See Below

Year:    NEW

Serial No.   

Email:    Click Here to Email Us

   

While great care is taken to accurately communicate specifications and information about the "used" and "demo" machines and accessories we offer, in order to minimize confusion and best communicate a machine’s or item’s condition and specifications, a personal visual and mechanical inspection by the Buyer is highly recommended prior to purchase.

QUALITY Products
from QUALITY Manufacturers

Check out our wide variety of solutions to satisfy your machine tool requirements.